此页面上的内容需要较新版本的 Adobe Flash Player。

获取 Adobe Flash Player

PA sheet / board

 

Introduction:

PA is abbraviation of polyamide  and nylon .Cast with 100% virgin nylon by molding of casting nylon PA6, PA66 sheet. Nylon PA is recognized as the most widely used and known engineering plastic in the current market. PA6 has the best performance, very tough, even at low temperatures, and high hardness in the surface, toughness, mechanical lower shock, and abrasion resistance. Combined with these characteristics and good insulation, and chemical properties, it has become common-level materials. Its widely used in a variety of mechanical structures and spare parts. Compared to PA6, PA66 own the higher hardness, rigidity, a good resistance to wear and heat deflection temperature. Apply to Bearings, gears, wheels, roller shaft, water pump impeller, fan blades, oil delivery pipe, oil storage pipe, rope, fishing nets and transformer coi

 

Specification:

Nylon Sheet Width(m)
1-3
Relative Density(g/cm3)
 1.14
 Water Absorption(%)
 3.0-4.2
 In-process Shrinkage(%)
 0.6-1.6
 Tensile Strength(MPα)
74 
 Breaking Extension(%)
200 
 Rockwell Hardness
R114 
 Notch Impact Strength(kj/m2)
56 
 Life-term Service Temperature(°C)
105
 Thermal Deformation Strength(°C)
 70
 Linear Expanding Coefficient(×10-5K-1)
 6.5
 Thermal Conductivity[W/(m×k)]
 0.25
 Volume Resistivity(Ω×cm)
 5×1013
 Dielectric Constant(106Hz)
 3.5
 Dielectric Strength(KV/mm)
 18

 

Thickness(mm)
Length X width(mm)
Color
 
Density
(g/cm3) 
0.3-60mm
1200X600mm or 1000X1200mm l
White, black, blue,yellow,
or as required
 
1.14

 

 

Character:

1. high strength and stiffness

2. high impact and notch impact strength

3. high heat deflection temperature

4. good at dampening

5. good abrasion resistance

6. low coefficient of friction

7. good chemical stability against organic solvents and fuels

8. excellent electrical properties, ease of printing and dyeing

9. food safe, noise reduction

 

Use:

Widely used in chemical machinery, equipment, anti-corrosion system of gears and parts bad materials. Wear-resistant parts, transmission structural parts, household electrical appliances spare parts, automotive parts, screw to prevent the mechanical parts, chemical and mechanical parts, chemical equipment