Introduction::
Hydrogenated petroleum Resin based on ethylene cracking of the C5 fraction as raw material, from the C5 component of the double and single en-ene formed by cationic polymerization. Density of about 1.0, soluble in organic solvents such as benzene, toluene, xylene, solvent oil, the model does not dissolve in water. Appearance of granular solids, the appearance of white or yellow, friable, easily generate dust, non-toxic, tasteless, non-inflammable and explosive materials.:
Specification:
Specification
|
Hydrogenated petroleum Resins
|
|||
Property
|
Test Method
|
Unit
|
SH-H100-0#
|
SH-H100-1!
|
R&B Softening Point
|
ASTM E28-58
|
°C
|
95-105
|
95-105
|
Color
|
ASTM D-1544
|
GC
|
0 max
|
1.0 max
|
Melt Viscosity
|
ASTM D3835
|
mpa.s
|
300 max
|
300 max
|
Insoluble
|
ETM-E-99
|
Vo1 %
|
0.002 max
|
0.002 max
|
Acid Value
|
ASTM D-974
|
mg KOH/g
|
0.50 max
|
0.50 max
|
Bromine value
|
|
Br 2 g / 100g
|
1.0 max
|
2.0max
|
Recommended Applications
|
thermosol
shoe adhesive pressure sensitive adhesive hot melt road marking paint |
thermosol
shoe adhesive pressure sensitive adhesive hot melt road marking paint |
Application:
Commonly used in Pressure sensitive adhesive, Adhesives (eg. HTMS, HTMRM), and contact adhesives, plastic modification, Tyre, Commodity binding, book binding, Shoes sole modification, rubber compounding, leather and footwear assembly, polypropylene film modification, and multicolour asphaltum, etc.